FLAME PHOTOMETER
Model No: PSAW-271
SALIENT FEATURES:
- Single Channel in Model PSAW-271.
- Stainless Steel round burner.
- Concentric Non-Corrosive Nubblier.
- Narrow Band interface Filters.
- Dual 3½ Digit RED LED display.
- In-built linearizer circuitry.
- In-built automatic flame failure detection.
- Highly Stable & Accurate.
Product Information
TECHNICAL PARAMETERS:
- Model : Single-Channel Flame Photometer
- Filters : Ca, Li, Ba, Na, K
- Measurement Range : 0 to 199.9ppm
- Specificity : <0.5% interference when concentrations equal test sample concentrations
- Sensitivity : Na & K: 3 to100ppm, Ca & Li: 5 to 100 ppm, Ba: 100 to 200 ppm
- Linearity : <2% error 3 ppm Na/K & 5 ppm Li are set to read 100
- Reproducibility : <1% coefficient of variation for 20 samples using 10ppm, Na set to read 50
- Stability : <2% drift over 5min (10 ppm sample set to 50.0)
- Reading Stabilization Time : ~8 sec.
- Aspiration Rate : 2 to 6 mL/min
- Air Supply : 6 L/min at 14 psi (oil & moisture free)
- Display : 3½ digit LED; 12.5 mm (1/2") H
- Fuel Supply : High-grade propane/butane, or propane/butane mixture Regulated at ~0.36 psi
- Natural gas : 3 to 10" W.G.
- Recorder Output :100 mV
- Accessories : Nebulizer, water separator burner, filters, air compressor, cleaning solution, necessary filled gas cylinder,
- Warranty : 3 year’s
